ProLiant Servers (ML,DL,SL)
1753767 Members
5633 Online
108799 Solutions
New Discussion юеВ

Change of use of ML330e

 
P.D.O'Grady
New Member

Change of use of ML330e

The school where I work has recently upgraded the admin. server and I want to set up this now redundant ML330e as a workstation. Is it ok to use this with Windows XP as that is standard and we have licences. I have already formatted and loaded XP and everything is fine but am experiencing one or two problems - I added a modem and although it loaded ok I can't find it. There isn't even a modems section in device manager.
Apologies for the level of my ignorance but I figured it worth a try.

Paul.
2 REPLIES 2
Prashant (I am Back)
Honored Contributor

Re: Change of use of ML330e

Hi,

Boot up the Box in safe mode then check, for any entries as unknown device.

Any error under IML check

Prashant S.
Nothing is impossible
P.D.O'Grady
New Member

Re: Change of use of ML330e

The modem I want to use to make a broadband connection from my home office is installed ok and listed under Network Adapters but when I attempt to setup a connection to my ISP it always appears as using WAN miniport PPPoE. Is there any way round this?

Thanks in advance.

ps. Is there anywhere more appropriate I should be asking this type of question?