HPE Community
ProLiant Servers (ML,DL,SL)
1753602 Members
6956 Online
108796 Solutions
New Discussion

Changing CMOS Battery On A Proliant 1850R

 
Frank_180
Occasional Advisor

‎10-12-2004 09:13 AM

‎10-12-2004 09:13 AM

Changing CMOS Battery On A Proliant 1850R

Is there a suggested way to replace the CMOS battery on a Proliant 1850R?
0 Kudos
Reply
1 REPLY 1
JohnWRuffo
Honored Contributor

‎10-12-2004 02:27 PM

‎10-12-2004 02:27 PM

Re: Changing CMOS Battery On A Proliant 1850R

Frank:

Yes, you can install a RTC battery by following the manual here:
http://h200007.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_327160-001_ch2/TPM_327160-001_ch2.pdf
Look on page 36 and 37.

Change the jumper on header E2 from pins 6-7 to pins 5-6.

Install this battery:
http://tinyurl.com/5cph7

Plug the battery connector onto pins 1-4 of header E2 on the system board.

G'luck! -john

p.s., you may find this battery at Radio Shack and other Electronic Stores.
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.