ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Changing RAID card from 408i to 816i

 
SOLVED
Go to solution
dekkerdj
Occasional Visitor

Changing RAID card from 408i to 816i

If I replace a p408i-a raid card with a p816i-a raid card, will the new card read the drive and raid configuration off the physical disks, or will I have to configure from scratch and then do a full restore from backup ?  On an ML350G10 server

2 REPLIES
Highlighted
Jimmy Vance
HPE Pro
Solution

Re: Changing RAID card from 408i to 816i


@dekkerdj wrote:

If I replace a p408i-a raid card with a p816i-a raid card, will the new card read the drive and raid configuration off the physical disks, or will I have to configure from scratch and then do a full restore from backup ?  On an ML350G10 server


The RAID information is stored on each disk in the arrays(s).  You do not need to re-create the arrays. Make sure the P816 has the latest firmware. Best practices dictate whenever working with disks / arrays make sure you have a good data backup .




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
dekkerdj
Occasional Visitor

Re: Changing RAID card from 408i to 816i

Thanks - will post back after I try it