ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco CGESM Blade Switch

Cisco CGESM Blade Switch

Hi guys. Im hoping a Cisco expert helps with this one. Do you know how to enable the crosslinks via the CLI console. I am not an IOS person so have no idea, nor can I find anything in the manuals. Is there a quick guide. Many Thanks.
2 REPLIES
Jeff Allen_5
Valued Contributor

Re: Cisco CGESM Blade Switch

like this:

enable
conf t
int g0/17
no shut
int g0/18
no shut
exit
exit
write mem

That will do it. You need to do it on both switches. Make sure you have everything setup properly because this could start a loop.

Re: Cisco CGESM Blade Switch

Many Thanks Jeff. I will try it.