HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco Callmanager 6 on DL320 G5p ( SATA driver Problems)

 
Senior_Rossi78
Occasional Visitor

Cisco Callmanager 6 on DL320 G5p ( SATA driver Problems)

Hi,

i want to install the cisco callmanager 6 on a DL320 G5p with integrated SATA RAID Controller from Intel ( 82801GR). Until Yet i tried any driver floppy-disks for solving my "no driver available"-problem, but still without success. I used the RHEL 4 SATA floppy images. The phone support doesn'call my back, since i generated a ticket 2 days before...
Has someone here solved this kind of problem?

Thanks!

Christian Schneider
2 REPLIES
MOH_2
Occasional Visitor

Re: Cisco Callmanager 6 on DL320 G5p ( SATA driver Problems)

Hi Christian,

have you found a solution?
I `m facing exactly the same problem.
Senior_Rossi78
Occasional Visitor

Re: Cisco Callmanager 6 on DL320 G5p ( SATA driver Problems)

Hi Moh,

the fact is, that Cisco does not support this type of machine with this type of integrated SATA Controller. The Callmanager 6 is based on RHEL 3 and HP supports with the G5p only up from RHEL 4. Thats the main problem...
The only solution for this problem could be a separate Raid Controller, which is placed in one of the PCI-X Slots. He has to be compatible with the Cisco Callmanager requirements. And finally, before installing the new card, disable the onboard controller in the bios settings...
The Securest Way: Buy a compatible Server ;-)