HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco GESM in combination with Brocade FC San switch interconnect?

 
SOLVED
Go to solution
Werner Driezen
Occasional Contributor

Cisco GESM in combination with Brocade FC San switch interconnect?

Can the Brocade FC san switch interconnect be combined with a Cisco GbE switch module in a blade system enclosure?

Thanks,
W.
4 REPLIES
Steven Clementi
Honored Contributor
Solution

Re: Cisco GESM in combination with Brocade FC San switch interconnect?

To my understanding, that is the only SAN option when using the Cisco GESM Interconnect.

The other viable SAN option is the PP2 (Patch Panel 2) which is 8 pass through ports on the front side of the enclosure/interconnect. Either way, you need to buy SAN switches for a new deployment.


Steven

Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Steven Clementi
Honored Contributor

Re: Cisco GESM in combination with Brocade FC San switch interconnect?

Aside from the McData switch.

Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Werner Driezen
Occasional Contributor

Re: Cisco GESM in combination with Brocade FC San switch interconnect?

Thanks Steve, that's what I wanted to know...
Werner Driezen
Occasional Contributor

Re: Cisco GESM in combination with Brocade FC San switch interconnect?

-