ProLiant Servers (ML,DL,SL)
1748180 Members
4336 Online
108759 Solutions
New Discussion юеВ

Re: Clone system disk RAID 0 - HP Smart Array 641

 
jmescriva
New Member

Clone system disk RAID 0 - HP Smart Array 641

Hi,
I have this configuration:
-Proliant ML370 G3 Server with Smart Array 641.
-One 36GB system disk (win 2003 SBS) RAID 0.
-4 72GB data disk in 2 arrays RAID 1+0.

System predicts 36GB disk failure and I want clone it and subtitute.
I plugged another 36GB disk and create new array. Then, with Acronis I have clone disk.
But when I remove original system disk I can't configure system to start form new array.

What is the correct procedure to clone disk and change disk that is about to fail?

Thanks.
2 REPLIES 2
V├нctor Cesp├│n
Honored Contributor

Re: Clone system disk RAID 0 - HP Smart Array 641

SmartArrays always boot from Array A, if you create a new array and copy data to it, it will not be bootable.
What you could do is add a second disk to array A and convert the logical drive to RAID 1, all the data will be copied to the new disk and you can use either of them to boot.
Alex_lluert
New Member

Re: Clone system disk RAID 0 - HP Smart Array 641

viendo la respuesta de vcespon...

No es posible hacer que arranque des de otra unidad logica?

Yo tengo un RAID1 en sistema, por problemas de windows he clonado el Disco similiar a como lo hizo jmescriva y ahora me gustaria quitar los discos de sistema (0 y 1) y arrancar para hacer pruebas con el nuevo disco (5).

He desenchufado fisicamente los dos discos RAID1 del sistema, y creado la unidad logica con el nuevo disco.

Aunque se queja que no encuentra los dos discos, al continuar no puede arrancar el sistema con el nuevo disco! Not boot disk!

Como modificar que arranque con el nuevo disco? no es posible?

Muchas gracias