ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Cluster not sieng lungs

daniemal002
Occasional Advisor

Cluster not sieng lungs

Please see if you can help me with the following problem. We recently reinstalled 2 servers using SmartStart and Firmware 7.91. Both these servers are DL580 G2 and are clusters. Both these servers were evict from the cluster management, before the reinstallation both these servers. They could see the lungs that were presented to them. All the correct drivers and multi path is installed.

We did un present the disks, restarted the server and presented the disks again. Could it be possible that it lost the zoning ? Or could the problem be with the cluster management as the cluster management controls the drives. The servers can see the lungs but is unknown and unreacable telling me that the problem is with the cluster management

It is an EVA 3000 and the multi path that was used is 1.02