ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Compaq ML330 G2

Peter Dominey
Occasional Visitor

Compaq ML330 G2

I have a customer you would like SCO Openserver 5.0.6 installed on the above machine. It has at present the SCSI feature board installed. However the customer would like to have mirrored drives - but the SCSI board doesn;t support that.

I thought about putting an Adaptec 2400 in, but sure that wouldn't work with the SCSI feature board installed, but how could I remove that, the ML330 wont bott without a feature board installed - will it?

Is it possible to order an ATA (RAID) feature board for a G2 from HP still? and if so does it support SOC Openserver 5.0.06?

Appreciate your assistance

Peter
1 REPLY
Prashant (I am Back)
Honored Contributor

Re: Compaq ML330 G2

Hi Peter,

Recomnded storage controllers are as folow :

Smart Array 221 Controller5 388099-B21
Smart Array 431 Controller 5 127695-B21
Smart Array 431 Controller (Japan) 127695-291
Smart Array 3200 Controller 5 295643-B21
Smart Array 532 Controller 5 225338-B21
Smart Array 532 Controller (Japan) 225338-291

Where as compatibility goes check this out

http://h10018.www1.hp.com/wwsolutions/sco/index-all.html

Nothing is impossible