- Community Home
- >
- Servers and Operating Systems
- >
- HPE ProLiant
- >
- ProLiant Servers (ML,DL,SL)
- >
- Re: Compaq ML530, Array 3200 and windows 2003
ProLiant Servers (ML,DL,SL)
1753645
Members
5978
Online
108798
Solutions
Forums
Categories
Company
Local Language
юдл
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
юдл
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Go to solution
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО03-01-2004 12:48 PM
тАО03-01-2004 12:48 PM
Hi,
I am currently trying to install windows 2003 on a ML530 with an array 3200 controller. I am using the Smartstart 5.3 CD as 6.4 does no support the 3200 controller. I am setting it up by a manual install, configured the logical drive (2*18gb mirrored) and reboot to start the Windows 2003 installation. It loads all the driver and gets to the "windows is starting" blue screen (just after it loads all the device drivers) and just hangs. I have tried a numbers and things and still end up at this point.
Any help would be appreciated.
Ian
I am currently trying to install windows 2003 on a ML530 with an array 3200 controller. I am using the Smartstart 5.3 CD as 6.4 does no support the 3200 controller. I am setting it up by a manual install, configured the logical drive (2*18gb mirrored) and reboot to start the Windows 2003 installation. It loads all the driver and gets to the "windows is starting" blue screen (just after it loads all the device drivers) and just hangs. I have tried a numbers and things and still end up at this point.
Any help would be appreciated.
Ian
Solved! Go to Solution.
3 REPLIES 3
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО03-02-2004 03:30 AM
тАО03-02-2004 03:30 AM
Solution
Hello Ian,
In system configuration what's your OS set as?? If it's set to 'Other' then try setting it as W2K to see if this makes any difference. Just to let you know that W2K has native support for SA3200. I shall find out if W2K03 has native support for this as well and let you know.
Regards,
In system configuration what's your OS set as?? If it's set to 'Other' then try setting it as W2K to see if this makes any difference. Just to let you know that W2K has native support for SA3200. I shall find out if W2K03 has native support for this as well and let you know.
Regards,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО03-03-2004 01:56 AM
тАО03-03-2004 01:56 AM
Re: Compaq ML530, Array 3200 and windows 2003
Ian,
W2k3 does have native support for the 3200 array controller, using driver cpqarray.sys. As the previous post asks, make sure that the OS type in System Configuration is set to Microsoft Windows 2000, and confirm the 3200 is set for first in the controller boot order sequence. Lastly, make sure that you have the latest BIOS for the ML530 and the 3200 Array controller.
Let us know how it works out.
Neal
W2k3 does have native support for the 3200 array controller, using driver cpqarray.sys. As the previous post asks, make sure that the OS type in System Configuration is set to Microsoft Windows 2000, and confirm the 3200 is set for first in the controller boot order sequence. Lastly, make sure that you have the latest BIOS for the ML530 and the 3200 Array controller.
Let us know how it works out.
Neal
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО03-04-2004 12:14 PM
тАО03-04-2004 12:14 PM
Re: Compaq ML530, Array 3200 and windows 2003
Thanks for the replys, it did indeed fix my issue. I selected the manual installed and selected w2k instead of other and it's now building as I post :)
Thanks again, now off to upgrade our servers :)
Ian
Thanks again, now off to upgrade our servers :)
Ian
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP