ProLiant Servers (ML,DL,SL)
1747990 Members
5080 Online
108756 Solutions
New Discussion юеВ

Re: Compaq Proliand 600

 
Lincolin
New Member

Compaq Proliand 600

Greeting!
I have one problem at mentioned server!
He writes out me mistake:
-------------------------------------------------
1702-SCSI Cable Error Detected, System Board
System Halted
-------------------------------------------------
Wonders me what her cause you mistake?
Can you help me?
Get down from Slovenia so is my English little worse!
Beautiful greeting, Grega
5 REPLIES 5
Oleg Koroz
Honored Contributor

Re: Compaq Proliand 600

1702 SCSI Cable Error Detected. System Halted.

This message indicates a termination or cabling problem with the system board integrated SCSI controller. Refer to cabling information in the Setup and Installation Guide, or Reference Guide, that accompanied the server.

1. Reset SCSI cable on the controller and SCSI Connectors on the Device
2. Check if they're any Bent Pins, Correct Jumpers
3. Replace SCSI cable
Lincolin
New Member

Re: Compaq Proliand 600

Problem is in this, have of all card (SCSI controlers) moved away from computer me problem again writes. Only graphic card is connected at that time and problem repeats. On motherboard is not none SCSI controler but are common SLOT connections!
Have also problem with entry in Setup, hoverver me wonders how can come in Setup?
L.P. Grega, Slovenia
Lincolin
New Member

Re: Compaq Proliand 600

Do you can help?
Terry Hutchings
Honored Contributor

Re: Compaq Proliand 600

What kind of server is this? This is usually caused by a lack of termination.
The truth is out there, but I forgot the URL..
Lincolin
New Member

Re: Compaq Proliand 600

This server is Compay Proliand 600, but this server is very old!
Can I help me?
Where is problem?