ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Compaq Proliant 7000 Server Not Starting - Power On

SOLVED
Go to solution
Murphy Adeleke
Occasional Visitor

Compaq Proliant 7000 Server Not Starting - Power On

We have four Compaq Proliant 7000 Servers. When I turned any of the servers on, it would power on and the LCD would have the fireware, but the server would not process anything.

Kindly help as I really need to make any one of the server working.

Thanks.

2 REPLIES
Prashant (I am Back)
Honored Contributor
Solution

Re: Compaq Proliant 7000 Server Not Starting - Power On

Hi,

On PCI/EISA Expansion Board make the switch 6 to on position to Clear NVRAM before this disc hdd and power down the server then check agian .


Regards,
Prashant S.
Nothing is impossible
Brian_Murdoch
Honored Contributor

Re: Compaq Proliant 7000 Server Not Starting - Power On

Hi,

The Proliant 7000 does have lots of interlock checks to go through before it posts so I hope you are waiting for a few minutes before giving up.

I have attached a section of the PL6000/7000 Troubleshooting guide which might help you isolate the problem. If you need more detail or a copy of the full troubleshooting guide please e-mail me at brian.murdoch@hp.com.

I hope this helps,

Brian