HPE Community
ProLiant Servers (ML,DL,SL)
1753464 Members
4573 Online
108794 Solutions
New Discussion

Compaq Smart 2-DH Disk Array Controller

 
Ayman Altounji
Valued Contributor

‎09-05-2002 04:00 PM

‎09-05-2002 04:00 PM

Compaq Smart 2-DH Disk Array Controller

Hi All, Were running NetWare 3.12 on a Remote International server which has just received an error message referring to the Disk Array module CPQDA 386. The log says the physical drive W/SCSI ID 0 attached to port 1 of the Compaq array controller has failed and then says that it is operating in recovery mode and that the device is operating in interim recovery mode. We don't have insight manager install on the server, but want to know is there another way of knowing the extent of the problem

Thanks
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎09-09-2002 04:00 PM

‎09-09-2002 04:00 PM

Re: Compaq Smart 2-DH Disk Array Controller

Hi ?? device is operating in interim recovery mode?? mean that is a failed hard drive and your raid 5 is compensate for that drive. One need replace that since you no longer have the raid 5 protection. If you loose one you will be losing your array.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.