ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Compaq Smart 2-DH Disk Array Controller

Ayman Altounji
Valued Contributor

Compaq Smart 2-DH Disk Array Controller

Hi All, Were running NetWare 3.12 on a Remote International server which has just received an error message referring to the Disk Array module CPQDA 386. The log says the physical drive W/SCSI ID 0 attached to port 1 of the Compaq array controller has failed and then says that it is operating in recovery mode and that the device is operating in interim recovery mode. We don't have insight manager install on the server, but want to know is there another way of knowing the extent of the problem

Thanks
1 REPLY
Ayman Altounji
Valued Contributor

Re: Compaq Smart 2-DH Disk Array Controller

Hi ?? device is operating in interim recovery mode?? mean that is a failed hard drive and your raid 5 is compensate for that drive. One need replace that since you no longer have the raid 5 protection. If you loose one you will be losing your array.