ProLiant Servers (ML,DL,SL)

Compatible memory spec for DL160 Gen10 3106

 
DEMinSOCal
Occasional Contributor

Compatible memory spec for DL160 Gen10 3106

Our server took a dump overnight and when it's powered on, the front LED's all blink 3 times, pause, 3 times, repeat, which identifies as a memory issue.

So, looking at what we have available immediately, does anyone know if 2Rx4 2133P 16GB ECC Registered  modules will work (SK Hynix)?  The spec on HPE site says 1R (Single Rank) for the 16GBx1 config,, but not really familiar with HPE so will other ranks or bit widths work (like 1Rx8 or 2Rx8)??

This is what we have a few of:

https://www.newegg.com/hynix-16gb-288-pin-ddr4-sdram/p/1WK-002C-00006

Thanks.

2 REPLIES 2
StorageMike
HPE Pro

Re: Compatible memory spec for DL160 Gen10 3106

Hi

The following lists all the supported spare parts

https://support.hpe.com/hpesc/public/docDisplay?docId=a00077136en_us&docLocale=en_US

I work for HPE

Accept or Kudo

SanjeevGoyal
HPE Pro

Re: Compatible memory spec for DL160 Gen10 3106

Hello,

 

I hope the below documents will help you.

 

HPE ProLiant DL160 Gen10 Server QuickSpecs

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00021860enw

HPE ProLiant DL160 Gen10 Server - Spare Parts

https://support.hpe.com/hpesc/public/docDisplay?docId=a00077136en_us&docLocale=en_US

HPE ProLiant DL160 Gen10 Server - Option Parts

https://support.hpe.com/hpesc/public/docDisplay?docId=a00077135en_us&docLocale=en_US

 

I would suggest you use only supported components in the HPE server.


I am a HPE Employee

Accept or Kudo