HPE Community
ProLiant Servers (ML,DL,SL)
1753797 Members
7594 Online
108799 Solutions
New Discussion

Compativility / ultra wide 2 y ultra wide 3

 
Ayman Altounji
Valued Contributor

‎03-13-2001 04:00 PM

‎03-13-2001 04:00 PM

Compativility / ultra wide 2 y ultra wide 3

Having 21 ID on a RAID 5 with 11 hard drives respectably with SCSI ultra wide 3, intermittently an error comes up, as follow: FAILED RAID REQUIRES TO REBUILD REBOOT THE SERVER.
If you do reboot it, the server start up perfectly, but the error persist. The following actions has been take.
Swuap drive cage, upgrade firm wares, replace the ID failing.

Any suggestions will be appreciated.
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎04-24-2001 04:00 PM

‎04-24-2001 04:00 PM

Re: Compativility / ultra wide 2 y ultra wide 3

what kind of raid controller card are you using, any part number? tell me the part number of the hard drives you are using also. There is some issue about Compaq 4250ES controller and 18.2 GB Fujitsu Ultra3 drives. Need to replace system board with spare number 126982-001 and SCSI backplane with spare number 126994-001.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.