ProLiant Servers (ML,DL,SL)
1748179 Members
4046 Online
108758 Solutions
New Discussion юеВ

Configuration Task in HP Smart Array Gen 9 Controllers

 
SOLVED
Go to solution
Laritza
Occasional Contributor

Configuration Task in HP Smart Array Gen 9 Controllers

Please I have a doubt and I was reading in HP Smart Storage Administrator User Guide,Edition:4,Year:2015,page 6 it is said that the procedure:Configure RAID 1 Advanced Data Mirroring (ADM) and RAID 10 Advanced Data Mirroring(ADM) in HP Smart Array Gen9 Controllers(RAID Mode) is made by P-Series only.The first question is:

What does mean P-series only ?

and others question are:

Is possible that I could create a RAID 1 in HP Proliant DL380 Gen9 and
HP Proliant DL360 Gen 9?
How can i identify that my server fulfil with P-series only?

because I do not understand about this procedure,I am worried with that,thanks in advance.I am sending a photo about this doubt

2 REPLIES 2
Jimmy Vance
HPE Pro
Solution

Re: Configuration Task in HP Smart Array Gen 9 Controllers

It mean this feature is only available on 'P' series Smart Array controllers and not the 'B" series embedded Dynamic Smart Array chipset controllers, nor the 'H" series Smart HBA

 P440, P840 are P series, B140i is B series chipset controller, and H240 is the H series Smart HBA.  

All of the above controllers are capable of RAID 1

 

No support by private messages. Please ask the forum! 
Laritza
Occasional Contributor

Re: Configuration Task in HP Smart Array Gen 9 Controllers

Thanks for yor help,you are very kind with your answer