Configuration with smart start 7.2

[Alejandro Muñoz]

I HAD 2 SCSII DISK OF 72 gb
With f8 tell me
HPSCSI CARDS FOUND
1 hp ultra4 dual channel at slot 0 port o
2 hp ultra4 dual channel at slot 0 port 1
do you want to change the scsi card id yes(y) /No (n)
i need know the configuration for scsi id
thanks

[SURESHKUMAR.P]

Hi Alejandro Muñoz,

In such case no need to change the Scsi card id, if you want create RAID following
levels.

ie.
RAID0: 72GBX2NO'S UTILIZING SPACE:140GB R/W FAST
RAID1: 72GBX2NO'S UTILIZING SPACE:70GB
R/W NORMAL

All the best.

Thanks and Regards
Suresh.P

[Alejandro Muñoz]

THANKS

[Terry Hutchings]

What is it you're attempting to do? It sounds like you don't have an array controller installed and you're drives are attached to the embedded scsi.