ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuration with smart start 7.2

 
Alejandro Muñoz
Occasional Contributor

Configuration with smart start 7.2

I HAD 2 SCSII DISK OF 72 gb
With f8 tell me
HPSCSI CARDS FOUND
1 hp ultra4 dual channel at slot 0 port o
2 hp ultra4 dual channel at slot 0 port 1
do you want to change the scsi card id yes(y) /No (n)
i need know the configuration for scsi id
thanks

3 REPLIES 3

Re: Configuration with smart start 7.2

Hi Alejandro Muñoz,

In such case no need to change the Scsi card id, if you want create RAID following
levels.

ie.
RAID0: 72GBX2NO'S UTILIZING SPACE:140GB R/W FAST
RAID1: 72GBX2NO'S UTILIZING SPACE:70GB
R/W NORMAL

All the best.

Thanks and Regards
Suresh.P
Alejandro Muñoz
Occasional Contributor

Re: Configuration with smart start 7.2

THANKS
Terry Hutchings
Honored Contributor

Re: Configuration with smart start 7.2

What is it you're attempting to do? It sounds like you don't have an array controller installed and you're drives are attached to the embedded scsi.
The truth is out there, but I forgot the URL..