ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring IPMI/RMCP on HP cc3310 server

Raghavendra.P.G
Occasional Visitor

Configuring IPMI/RMCP on HP cc3310 server

Hi,

We need to enable the IPMI/RMCP for cc3310 carrier grade server for remote management.

We've enabled the Remote management entering into the service partition (using resource CD came with the server). We have given the ETH0 NIC's ip address, netmask and gateway addresses in the 'Lan confiure' for remote management.

But BMC is not responding to the RMCP ping request.

The cc3310 carrier grade server's specification says that it is complaint with IPMI v1.5.

We Need help in correctly configure the BMC for IPMI v1.5

Thanks,
Raghavendra