ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring System Partition (C) using SmartStart

Emmarick
Occasional Visitor

Configuring System Partition (C) using SmartStart

Hi All,

I will shortly be installing a ML 350 G4p running SBS standard.
running a pretty simple setup
3 x Disks in a Raid 5 setup off of a SA 641 controler card.

Can i partition this setup using SmartStart in to a C and D "drives"...?

If so any poiners or links...ive only set up servers using 2 disks in Raid 1 and the remainder in Raid 5 before.

kind regards..
Thanks in Advance
2 REPLIES
kuairen
Occasional Visitor

Re: Configuring System Partition (C) using SmartStart

HI, emmarick

you should use smartstart install SBS standartd, at partition step only setup
boot partition (C drives),input MB for C drives capability!!!

waiting for install OS complete ,then use OS disk management partition D drivers!!!

china

jerry

Emmarick
Occasional Visitor

Re: Configuring System Partition (C) using SmartStart

Many thanks Sir,

Uasually would have formatted remaining
Space after the system install anyway, thanks for clearing that up.

Kind Regards

Emma Rick