ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring server Ml 370 G6

wachiraking
Occasional Visitor

Configuring server Ml 370 G6

I have bought a ML 370 G 6 HP server I have loaded the windows server 2008 operating system the server has two SAS hard drives 147 GB each on ( Start > my computer I am seeing only one hard drive how can I enable the other hard drive

Rgds Patrick
2 REPLIES

Re: Configuring server Ml 370 G6

Hi

What is the raid type ?
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
TTr
Honored Contributor

Re: Configuring server Ml 370 G6

Most likely the two hard drives are bound in an array and what you see in windows is a raid disk, aka LUN, aka logical disk. The ML370 G6 has a built in P410i raid controller and the disks are attached to the controller.
The windows or any OS on this server will *not* see the two individual disks but will see only the logical disk devices that the raid controller presents out.