HPE Community
ProLiant Servers (ML,DL,SL)
1753797 Members
7643 Online
108805 Solutions
New Discussion

Re: Configuring without RAID

 
Ayman Altounji
Valued Contributor

‎02-13-2001 04:00 PM

‎02-13-2001 04:00 PM

Configuring without RAID

How do i configure a Proliant 1600 WIN NT server to run without RAID? I've used the smartstart cd but it always tries to make me create an array.
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎02-24-2001 04:00 PM

‎02-24-2001 04:00 PM

Re: Configuring without RAID


You have to determine what SCSI controller the hard drives are connected to. If the hard drives are attached to a Compaq array controller, you must create a logical array volume for the drives. If you want to use the hard drives as independent SCSI drives, connect the SCSI cable to the integrated SCSI controller, not to the array controller. Remove the array controller from the system. Run the system configuration program and save the new hardware configuration to CMOS.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.