ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Connecting external Ultrium 460 to SA 6402 on DL380 G4

Cresswell Williams
Frequent Advisor

Connecting external Ultrium 460 to SA 6402 on DL380 G4

Hi Experts

we have an additional SA 6402 controller that we popped into a DL380 G4. We attached two Ultrium 460 tape drives in an enclosure to the SA 6402 (The SCSI interface on the tape drives is LVD/SE and the controller SCSI is LVD)

When I boot the server I get the following:
SCSI ERROR: Single Ended SCSI or Direct Attached - This model can only support LVD.
Is LVD/SE and LVD not compatible or is there a setting I should change?

Secondly, when I add one of these tape drives to the on board 6i controller I am able to pick it up from Windows, but whe I reboot it is gives me the same SCSI ERROR.......strange...

There are no HDD drives configured on the 6402 controller for RAID purposes...

Please advise...
1 REPLY
cnb
Honored Contributor