Conrep return code 255

[technowooki]

Hello
With WINPE I want to configure the BIOS of a ProLiant DL380 Gen 9.
With the command "conrep -l -f -f .\input\biosConfig.xml I wanted to do this, but I always get the following error back.

conrep 5.3.0.0 - HPE Scripting Toolkit Configuration Replication Program (c) Copyright 2013,2017 Hewlett Packard Enterprise Development LP  	
System Type:			ProLiant DL380 Gen9 	
ROM Date   :			02/17/2017 	
ROM Family :			P89 	
Processor Manufacturer :	Intel(R) Corporation  XML System Configuration: conrep.xml Hardware   Configuration: .\input\biosConfig.xml 	
Global Restriction: [3.40                            ]                 
 OK   Platform check: 				
: [ProLiant DL3        ]	match 		
configuration data from .\input\biosConfig.xml System.Management.Automation.RemoteException ERROR: Unknown error code d4 when getting romev index 0
0x00000000: d4                                                .

Conrep return code: 255

[Vinod_HPE]

Hi Technowooki,

Sorry for the delay in the response.

Please refer below customer advisory & documents for the reported issue.

Please log a case with technical support team for any further assistance 

Troubleshooting Guide

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04807271

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05369824

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05178336&docLocale=en_US

https://hewlettpackard.github.io/python-redfish-utility/#scriptable-mode

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00028314en_us&docLocale=en_US

Thanks & Regards,

Vinod from HPE