ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Controller can't see an array

 
NadirMirziev
Occasional Contributor

Controller can't see an array

When I start ACU and want to configure array, the contrller can't see any thing !! what to do anybody please help.
4 REPLIES
Mark Matthews
Respected Contributor

Re: Controller can't see an array

What server?
What Array controller?
What disks?
Any previous config?

More info please...

---------------------------------------------------------------------------------
Please click the white Kudos star to the left if this post is helpful :)
NadirMirziev
Occasional Contributor

Re: Controller can't see an array

ML530 G2
When I start ACU and want to configure array, the contrller of the server (ML530 G2) can't see any disks. any logical disk !! what to do anybody please help.
Mark Matthews
Respected Contributor

Re: Controller can't see an array

Ok, one of the following items may be faulty...

Array Cont
Drive cage
Cable between the two
Drives

Are you sure everything is plugged in correctly?

I suggest updating the Firmware of the array controller (you still didnt tell us what it is) and the drives first.

Then try replacing the cable between the drive cage and the controller.

---------------------------------------------------------------------------------
Please click the white Kudos star to the left if this post is helpful :)
Marcus Martin
Frequent Advisor

Re: Controller can't see an array

I can see you struggle with english just bullet point your system from begining to end, plus anythings you have noticed in order for the guys here to help you further.

Good luck