ProLiant Servers (ML,DL,SL)
1753816 Members
7690 Online
108805 Solutions
New Discussion юеВ

Converting a DL140 G3 back to Non hot plug SATA

 
m quinn_1
Occasional Advisor

Converting a DL140 G3 back to Non hot plug SATA

What SATA connector do I use, HP parts center tells me the non hot plug SATA cable is not available (part # 416351-001) - ie Part is not orderable from HP parts store ?
4 REPLIES 4
Aks2
Valued Contributor

Re: Converting a DL140 G3 back to Non hot plug SATA

Hi
I checked the part details - its correct and I tried ordering for the same, it says its orderable and that the part is in stock.

attached the screen shot.
May be you can try again, you should be able to order.
Aks2
Valued Contributor

Re: Converting a DL140 G3 back to Non hot plug SATA

or you can try calling up Hp sales team and check with them
KarloChacon
Honored Contributor

Re: Converting a DL140 G3 back to Non hot plug SATA

Hi m quinn

it seems like m quinn is right.
in USA that is available but in Australia where m quinn is(according to profile) that part is not available.

"The following part(s) you entered were not found or not orderable:
416351-001 (Part Not Orderable)"

what about if you call a reseller in there?

also try this
http://h20141.www2.hp.com/hpparts/Search_Results.asp?cc=AU&SearchInc=PartNumberтМй=EN&jumpid=hpr_R1002_AUEN&SearchCriteria=416351-001
and call the number there

regards

Didn't your momma teach you to say thanks!
KarloChacon
Honored Contributor

Re: Converting a DL140 G3 back to Non hot plug SATA

Hi

Reseller Australia locator

http://h50112.www5.hp.com/AU/search.asp

regards
Didn't your momma teach you to say thanks!