Corrected Memory Error on ML350 G4

[Gareth Morgan_1]

Hi, I am receiving the following error on my Proliant ML350 G4, "Corrected Memory Error threshold exceeded" and an orange light is showing on the front panel. This happened once before and I rebooted the server and it went away, is this a serious issue ?

Many Thanks,
Gareth.

[Oleg Koroz]

Depend what event ID you have
Depend if System ROM up to date
If System Management Driver up to Date and agents
Additionally you can try to reset them, would be best if you can swap around for test purpose and monitor if problem follow memory module.

You should get slot number
Or open cover while Amber LED is on and Verify which slot is suspected

http://docs.hp.com/en/356703-001/356703-001.pdf

Page 15, 16


System ROM and other Updates
http://h18023.www1.hp.com/support/files/server/us/index.html

[Terry Hutchings]

This typically means the dimm needs to be replaced.

[Gareth Morgan_1]

Thanks all for the advice, will look into it with these guidelines.

[Gareth Morgan_1]

Memory problem

[Caster Troy]

Hi Gareth,
I dont know if your problem is fixed or not but anyhow this is a known problem on servers. This document may be of some help.