Cranky Ole DL580 G2 i5 Array Controller ADU

[John Naffke]

Get the following output from ADU
From ADU:

Big Surface Analysis Status Device Surface Analysis Status Status
Logical Drive 1 Consistency Initialization Completed Informational
Logical Drive 1 Consistency Check Failed Critical
Logical Drive 2 Consistency Initialization Completed Informational

Surface Analysis Status Device Surface Analysis Status Status
Logical Drive 1 Consistency Initialization Completed Informational
Logical Drive 1 Consistency Check Failed Critical
Logical Drive 2 Consistency Initialization Completed Informational

Driver version is 5.80.0.32
I have seen similar issue discussed however not in relation to i5 array controller. The resolution suggested 1. firmware update and 2. a couple of MS patches. Is there a similar issue/solution for the 5i? I have attached the ADU report for reference.

[Jan Soska · Accepted solution]

Hmm,
try latest firmware and driver... It could help even if there is no visible fix description....

Jan

[John Naffke]

We did just that and it cleared the issue. Thank you for the response.

[John Naffke]

Updated the driver and firmware and the problem was resolved.