ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Cranky Ole DL580 G2 i5 Array Controller ADU

SOLVED
Go to solution
John Naffke
Occasional Visitor

Cranky Ole DL580 G2 i5 Array Controller ADU

Get the following output from ADU
From ADU:

Big Surface Analysis Status Device Surface Analysis Status Status
Logical Drive 1 Consistency Initialization Completed Informational
Logical Drive 1 Consistency Check Failed Critical
Logical Drive 2 Consistency Initialization Completed Informational

Surface Analysis Status Device Surface Analysis Status Status
Logical Drive 1 Consistency Initialization Completed Informational
Logical Drive 1 Consistency Check Failed Critical
Logical Drive 2 Consistency Initialization Completed Informational

Driver version is 5.80.0.32
I have seen similar issue discussed however not in relation to i5 array controller. The resolution suggested 1. firmware update and 2. a couple of MS patches. Is there a similar issue/solution for the 5i? I have attached the ADU report for reference.
3 REPLIES
Jan Soska
Honored Contributor
Solution

Re: Cranky Ole DL580 G2 i5 Array Controller ADU

Hmm,
try latest firmware and driver... It could help even if there is no visible fix description....

Jan
John Naffke
Occasional Visitor

Re: Cranky Ole DL580 G2 i5 Array Controller ADU

We did just that and it cleared the issue. Thank you for the response.
John Naffke
Occasional Visitor

Re: Cranky Ole DL580 G2 i5 Array Controller ADU

Updated the driver and firmware and the problem was resolved.