Crash after system configuration

[Ayman Altounji]

After running the system configuration utility, the machine reboots, lets out two long beeps followed by two short beeps, then simply reboots again -- rinse and repeat. Any suggestions?

Sean

[Sunil Jerath]

Hello,
What is the System BIOS date and the version?? Which Raid controller you have in the system and the firmware version of the controller?? How much RAM. Please let us know the confiugration to assist you in the matter.
Regards,

[Ayman Altounji]

Here are the details:
Compaq System BIOS E24 8/5/1997
Smart 2-SL v1.80
256MB RAM

Thanks,
Sean

[Ayman Altounji]

I should also mention that I could not get this information during boot, as the system stops and reboots after "System Init" on the LCD display.

[Sunil Jerath]

Good Day Sean,
You definitely have an older System BIOS which needs to be updated. The SP to download for the system BIOS would be>>>SP14127 and the firmware version of the controller needs to be stepped up in a sequence with SP4433>>SP8050>>SP8562>>>SP19677.

Regards,