ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Crash after system configuration

Ayman Altounji
Valued Contributor

Crash after system configuration

After running the system configuration utility, the machine reboots, lets out two long beeps followed by two short beeps, then simply reboots again -- rinse and repeat. Any suggestions?

Sean
4 REPLIES
Sunil Jerath
Honored Contributor

Re: Crash after system configuration

Hello,
What is the System BIOS date and the version?? Which Raid controller you have in the system and the firmware version of the controller?? How much RAM. Please let us know the confiugration to assist you in the matter.
Regards,
Ayman Altounji
Valued Contributor

Re: Crash after system configuration

Here are the details:
Compaq System BIOS E24 8/5/1997
Smart 2-SL v1.80
256MB RAM

Thanks,
Sean
Ayman Altounji
Valued Contributor

Re: Crash after system configuration

I should also mention that I could not get this information during boot, as the system stops and reboots after "System Init" on the LCD display.
Sunil Jerath
Honored Contributor

Re: Crash after system configuration

Good Day Sean,
You definitely have an older System BIOS which needs to be updated. The SP to download for the system BIOS would be>>>SP14127 and the firmware version of the controller needs to be stepped up in a sequence with SP4433>>SP8050>>SP8562>>>SP19677.

Regards,