ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Crash during WTS install

Ayman Altounji
Valued Contributor

Crash during WTS install

I'm using SmartStart 4.9 and performing a manual install of Windows Terminal Server 4.0. The server is a DL580 quad 700/1MB cpus, 2.5GB ram and 3-9GB hard drives on a 431 array controller. The NT install had trouble identifing the dual-port Compaq nic (First problem)It's either a:

Intel EtherExpress Pro/100B Pci 100Base-TX, 10BaseT
or
82557-based 10/100 Ethernet Pci 100Base-TX, 10BaseT

Since I couldn't connect to the Domain, I told it to become a member of a unique group. The install started coping files and then I got the notorious blue screen of death:

stop:0x0000000A (0x00090028, 0x00000002, 0x00000001, 0x8012e85b)
IRQL_not_less_or_equal address 8012e85b has base at 80100000 - ntoskrnl.exe

blah blah blah

Any ideas would be greatly appreciated.
2 REPLIES
Ayman Altounji
Valued Contributor

Re: Crash during WTS install

I'm having the exact same problem. I am using a Compaq NC3134 Dual-port NIC. I swapped it out with a Compaq NC3122 Dual-port NIC with the same result. These two NICs do not appear to be compatible with Windows Terminal Server. Thanks in advance for any help.
Ayman Altounji
Valued Contributor

Re: Crash during WTS install

Do NOT use the Intel 82557 driver from NT 4.0. That driver is way too old. You need to remove that driver when installing and use our NC series drivers instead. These are available on the NT 4.0 SSD (from Smartstart or web) or dedicated driver kits.