D380 G5 Hangs variuos stages.

[Colin Patterson_1]

This server started blue screening with (Error code 0x0000002D, 0x00000000. When it hangs the ILO cannot be used:

We replaced the P400 array controller, the motherboard, memory in stages with not change.

The problem has progressed to the point where the server is hanging during the Smart Start CD boot or randomly during system diags. It's basically totally unstable and we cannot get any solid failure results to record. Other than randon NMI: parity errors or Hardware malfuntion blue screens:

Initially we were told to upgrade the firmware and drivers but that doesn't seem to be relevent with the smart start hanging during boot. I'm Looking at the CPU's now but really clutching at straws. I Can't provide a config dump or memory dump to attach as the thing won't stay up long enough.

[TarunJain]

Hi,
This is duplicate thread of
http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1387661
Kindly close this one.

[Colin Patterson_1]

duplicate thread