ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

DL 145 G3 :: swapped hard drives

Occasional Contributor

DL 145 G3 :: swapped hard drives


We had a server that needed replaced that was setup to be mirrored (RAID 1). I installed the new DL145, and then inserted one of the hard drives that was in the old server. LSI logic utility came back saying that the drive was in inactive mode. I then activate the drive and then the system came up. The problem is I am not able to get the second drive to be noticed. Once I put the second drive in the system does not come up.

Any suggestions?
Regular Advisor

Re: DL 145 G3 :: swapped hard drives

Have you configured RAID on the new server as well?
What is the controller on the new server?
And were you using a controller card (HBA) on the old server?
I know that I am intelligent, because I know that I know nothing.