ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 320 g5p Teaming Question

efirkey
Advisor

DL 320 g5p Teaming Question

I have been getting a Warning CPQTeamMP

 

Reading on similar topics some disolved the team and reteamed however when I dissolved the team because it was running slow and  then reset it, I am still getting the same warnings.

The roles don’t match and I cannot find whrere to make Port 1 Tx/Rx instead of Tx Only.

 

Any help would be great.

 

THX

3 REPLIES
Suman_1978
HPE Pro

Re: DL 320 g5p Teaming Question

Hi,

 

Here is one of the workarounds for this issue.

 

Ensure both NIC's are in the same network in order to have good communications between the adapters in order to send/receive the heartbeat.

In case both NIC's are in the same network and the issue persists, you can modify the heartbeat cycle timing under settings tab for the team properties and increasing the timer interval seconds.

 

efirkey
Advisor

Re: DL 320 g5p Teaming Question

Itried changing to the heartbeat cycle timing under settings tab for the team properties and increasing the timer interval seconds.

However I'm still having the same issue.


Any othere thought or ideas?

efirkey
Advisor

Re: DL 320 g5p Teaming Question

So far no warnings about the TEAM showing up in event viewer. Since the last one from yesterday around 3:49pm. I still do have one NIC only transmitting instead of transmit and receive, weird