ProLiant Servers (ML,DL,SL)
1745925 Members
4248 Online
108723 Solutions
New Discussion юеВ

DL 360 Gen 9 Logical drive failure after testing PCIe riser card.

 
SOLVED
Go to solution
Thawzin
Occasional Contributor

DL 360 Gen 9 Logical drive failure after testing PCIe riser card.

Server have 2 controller card and one PCIe riser card. After reseat the controller card(attach with HDD) Logical Drive failed. How to fix failure logical drive without lossing data.

4 REPLIES 4
krasinka1409
HPE Pro

Re: DL 360 Gen 9 Logical drive failure after testing PCIe riser card.

Did you remove any of the hard drives? 

 

Check in smart storage administrator , if the "re-enable" logical drive option is availavle. If yes, re-enable the LG. 

Thank you
I am an HPE Employee
Thawzin
Occasional Contributor

Re: DL 360 Gen 9 Logical drive failure after testing PCIe riser card.

No I don't remove HDD.

When I re-enable logical drive, is that is possible to loss data?

krasinka1409
HPE Pro
Solution

Re: DL 360 Gen 9 Logical drive failure after testing PCIe riser card.

Hello @Thawzin

 

If you try to klick on the re-ebale LG option, you are most probably getting an automated warning, saying that the option may cause data loss. If the Logical Drive is still healthy it will will come up again after re-enabling. If not, worst case would be to end in the same situation as now. So my recommendation is to re-enable the drive. 

Thank you
I am an HPE Employee
Thawzin
Occasional Contributor

Re: DL 360 Gen 9 Logical drive failure after testing PCIe riser card.

When I click  re-enable logical drive, I can see logical volume on server and I get back all of the data on server.Thanks you so much. Thanks for solutions.