DL 360 Gen 9 Logical drive failure after testing PCIe riser card.

[Thawzin]

Server have 2 controller card and one PCIe riser card. After reseat the controller card(attach with HDD) Logical Drive failed. How to fix failure logical drive without lossing data.

[krasinka1409]

Did you remove any of the hard drives? 

Check in smart storage administrator , if the "re-enable" logical drive option is availavle. If yes, re-enable the LG. 

[Thawzin]

No I don't remove HDD.

When I re-enable logical drive, is that is possible to loss data?

[krasinka1409 · Accepted solution]

Hello @Thawzin

If you try to klick on the re-ebale LG option, you are most probably getting an automated warning, saying that the option may cause data loss. If the Logical Drive is still healthy it will will come up again after re-enabling. If not, worst case would be to end in the same situation as now. So my recommendation is to re-enable the drive. 

[Thawzin]

When I click  re-enable logical drive, I can see logical volume on server and I get back all of the data on server.Thanks you so much. Thanks for solutions.