HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

DL-360 and BartPE network boot CD

Regular Advisor

DL-360 and BartPE network boot CD

Having some issues with the network adapter not initializing when I boot to a BartPE boot CD. The NIC is an NC7782 Broadcom chipset.

Has anyone encountered this and if so any clues?
Tarek Kawach
Honored Contributor

Re: DL-360 and BartPE network boot CD

Hi Qvalor:

What driver are you using for the NC7782 when you booting up.

HP ProLiant NC10xx/31xx/61xx/67xx/71xx/77xx/150x/310x Fast Ethernet and Gigabit Ethernet NIC Drivers for DOS NDIS2
version 7.70 A (17 Aug 04)

Systems ROMPaq Firmware Upgrade Diskette for HP ProLiant DL360 G4 (P52) Servers
version 4.01 P52-08/26/2004 (27 Sep 04)

What are the links in the boot floppy; possible not loading right driver.

Make sure you are using this driver and latest firmware and try again.

Best regards,


Hey, look a light at the end of the tunnel.
Regular Advisor

Re: DL-360 and BartPE network boot CD

It's not that easy. the only plugin is for broadcom 57xx. Does anyone have a plugin for the NC7782 for BartPE?
Gerhard Roets
Esteemed Contributor

Re: DL-360 and BartPE network boot CD

Go look there. Bart Gives instructions of repackaging these drivers. So you can plug it into your PE cd.