DL 360 gen 5 which hard drives? - DL 360 gen 5 quel disques dur ?

[CityHunter]

Bonjour,

Je suis désolé mon anglais n'est pas bon

J'ai 2 serveurs:
- Contrôleur DL 360 Gen 5  E200I  2X146 GB SAS
- Contrôleur DL 360 Gen 5 P4 00i  2X146 GB SAS

Je remplace les disques par SATA 7200tr / m

J'ai regarder de nombreux sites, tous les monde se contredit ...

Au final je ne sais pas quel disque dur SATA peut aller dedans ...

500 Go / 1to / 2to / .... SSD?

je vous remercie de votre aide

-------------------------------------------------- -------------------------------------------------- -

Hello,

I'm sorry my english is not good

I have 2 servers:
- DL 360 Gen 5 E200I 2X146 GB SAS Controller
- DL 360 Gen 5 P4 00i 2X146 GB SAS Controller

I replace the drives by SATA 7200tr / m

I look at many sites, everyone contradicts itself ...

In the end I do not know what SATA hard drive can go in ...

500 GB / 1to / 2to / .... SSD?

Thank you for your help

[Bunsol · Accepted solution]

Hi,

Please find below the quickspecs for the e200 and p400 series controller:-

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04140724

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04111741

Only difference between e200/e200i and p400/p400i is that e200 is a card and e200i is integrated on the board and the same is with p400i and p400.

Please refer to the above quickspecs to check the types of drives supported.

Regards,

Bunsol

[CityHunter]

thx you for reponse : 

HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard

Good for installed 

valided solution