ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 360G4P TOO NOISY

 
rogerp_1
Frequent Advisor

DL 360G4P TOO NOISY

Hi all,

We have a DL360g4p with an extra powersupply, server works a treat, however its extremly noisy, is there any was of telling the fans to slow down or something?

Cheers
2 REPLIES
SPa
Trusted Contributor

Re: DL 360G4P TOO NOISY

Depending on the Operating System the corresponding Proliant Support Pack or the Management Agents/Health Driver should be installed.

If already installed can check the fan speed in System Management homepage to check if they are operating on Normal Speed or High Speed.
Prashant (I am Back)
Honored Contributor

Re: DL 360G4P TOO NOISY

Hi,

check the Room temerature and check the Server component temperature.
Depending on this server increase and decrease the fan speed.
As sugested above from Sumesh do update the PSP and server BIOS because health monitoring is done with server BIOS and health drivers insalled with PSP.

Prashant S.
Nothing is impossible