DL 370 G6 NIC Teaming with NC375i

[The_Steel]

Hi All,

          I'm unable to Team interfaces on the embedded NC375i on a DL370 G6. First off I should point out I haven't teamed interfaces before, so I could be missing something essential.

My knowledge of the process is:

1. Setup server etc, 2. Update Drivers & Firmware 3. Install HP NCU and team away!

When I select two ports on the adapter I get a message that they are not compatible for teaming (screenshot below).

I haven't seen anything that would suggest the adapter doesn't support teaming, can anyone advise me where I'm going wrong?

Thanks!!

[Abhishek Bangalore · Accepted solution]

Hello,

In order to configure the NIC teaming. The nic teaming driver is necessary which will be installed with the NCU.

In order to configure the same please refer the link provided below:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01663264/c01663264.pdf

Refer the page number 5 and you will be able to configure the same.\

Regards

Abhishek

[The_Steel]

Abishek,

                That was right on the mark. Teaming is now successful; Thanks!

[Abhishek Bangalore]

Hello,

It is great that the issue is resolved. Thanks for your patience...