ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 370 G6 NIC Teaming with NC375i

SOLVED
Go to solution
The_Steel
Occasional Contributor

DL 370 G6 NIC Teaming with NC375i

Hi All,

          I'm unable to Team interfaces on the embedded NC375i on a DL370 G6. First off I should point out I haven't teamed interfaces before, so I could be missing something essential.

 

My knowledge of the process is:

 

1. Setup server etc, 2. Update Drivers & Firmware 3. Install HP NCU and team away!

 

When I select two ports on the adapter I get a message that they are not compatible for teaming (screenshot below).

 

I haven't seen anything that would suggest the adapter doesn't support teaming, can anyone advise me where I'm going wrong?

 

Thanks!!

 

HP NCU

3 REPLIES
Abhishek Bangalore
Frequent Advisor
Solution

Re: DL 370 G6 NIC Teaming with NC375i

Hello,

 

In order to configure the NIC teaming. The nic teaming driver is necessary which will be installed with the NCU.

 

In order to configure the same please refer the link provided below:

 

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01663264/c01663264.pdf

 

Refer the page number 5 and you will be able to configure the same.\

 

Regards

Abhishek

Help other's for Better Tomorrow

I am an HP Employee
The_Steel
Occasional Contributor

Re: DL 370 G6 NIC Teaming with NC375i

Abishek,

                That was right on the mark. Teaming is now successful; Thanks!

Abhishek Bangalore
Frequent Advisor

Re: DL 370 G6 NIC Teaming with NC375i

Hello,

 

It is great that the issue is resolved. Thanks for your patience...

Help other's for Better Tomorrow

I am an HP Employee