ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

DL 380 Array Configuration

Occasional Visitor

DL 380 Array Configuration


I wonder if someone could help me; I bought a DL 380 G2 server without the Smart CD. I have been trying to configure the controllers but I am at a dead end. I am really frustrated because the System Configuration Utility cannot see my Fixed drives and neither can the Array Configuration Utility. However a DAAD disk can only see one controller though there are 2, when the server is booting up; Compaq Array 3200 controller and the Compart Smart Array 5i.

Can anyone please point me in the right direction?? I have 6 disks installed and this was working before, but I erased it and since then, I have not had a peace of mind. Please help...





P.S. This thread ahs been moevd from Disk to ProLiant Servers (ML,DL,SL). - Hp Forum Moderator

Acclaimed Contributor

Re: DL 380 Array Configuration

I would download the smartstart CD and try to boot it, see

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
James ~ Happy Dude
Honored Contributor

Re: DL 380 Array Configuration

Clear NVRAM, reseat HDDs.
Try Again.