cancel
Showing results for 
Search instead for 
Did you mean: 

DL 380 G3

Sanjay_26
Occasional Visitor

DL 380 G3

Hi All,
I have Proliant DL380 G3 Server with Operating system Novell 6.0 with memory 4 GB. Earlier it was havivg 2 GB RAM, after uphradation of 2 GB it is server is showing junk diskplay but services are working fine.
4 REPLIES
Jon Ward
Trusted Contributor

Re: DL 380 G3

Check the hp Management Agents at http://ipaddress:2301, username administrator, password administrator (unless that has been changed.) It should report any problems with the memory modules if that is the issue.
Sanjay_26
Occasional Visitor

Re: DL 380 G3

Hi Friend,
Thanks for support. I have checked with intgrated logs i am getting folowing logs ..kindly suggest

1) Fatal Exception (Number 14, Cause Abend: Page Fault Running Process: DISCOVER 4 Code executing in module LIBC.NLM v7.0 at offset +7AB75h)

2) Fatal Exception (Number 14, Cause Abend: Page Fault Running Process: gwinter 6 Code executing in module GWENN3.NLM v6.0d at offset +411D53h)

3) Fatal Exception (Number 14, Cause Abend: Page Fault Running Process: DISCOVER 4 Code executing in module LIBC.NLM v7.0 at offset +7AB75h)
Prashant (I am Back)
Honored Contributor

Re: DL 380 G3

Hi Sanjay,

Are you refering to Integrated Managemnt Logs for the same. As problem is started after installing the new memory. What is part number for the same modules.

Regards,
Prashant S.
Nothing is impossible
Prashant (I am Back)
Honored Contributor

Re: DL 380 G3

Hi,

Do update the management agent for the same server then check again.

Regards,
Prashant S.
Nothing is impossible