ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 380 G5 Array rebuilding and not rebuilding.

douglasbarber55555
Occasional Visitor

DL 380 G5 Array rebuilding and not rebuilding.

I have a DL 380 G5 that I have been troubleshooting for the last 3 weeks. The begin I thought the Hard drive failed. Replaced the hard and I am still having the same problem. The log says that the array is rebuilding the logical drive slot 3. Recheck it about 8 hours later it says that the logical drive in is que to be rebuilt. So it still hasn't rebuilt the drive. Any suggustions. I have attached the ADU report.

 

 

 

 P.S.This thread has been moved from ProLiant Servers - Netservers > to ProLiant Servers (ML,DL,SL)-HP Forums Moderat

1 REPLY
Med-H
Frequent Advisor

Re: DL 380 G5 Array rebuilding and not rebuilding.

Hi douglas,

 

 

please follow the step below :

 

- update the mart Array E200 and the ACU

- change the priority rebuild to High performance (ACU)


Download drivers and software :

 

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3182562&taskId=135&prodTypeId=329290&prodSeriesId=1157688&lang=en&cc=us

 

thanks

I am an HP employee