HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 380 G5 Raid 5 Drives Not Displaying Properly

 
Mark E. Hughes
Occasional Visitor

DL 380 G5 Raid 5 Drives Not Displaying Properly

I have 4 physical 72GB SAS Drives. When I look at the Smart Array E200 controller using the Array Configuration utility I see all 4 drives and the total size is displaying 209924 MB Raid 5.

When I look at the C: Drive properties it only shows 146 GB.

I went back through the Array wizard, selected my stripe size as 64K, RAID 5. I still only shows 146 GB on C: and 209 GB in the Array Controller. I have also ran diagnostics with HP Insite Manager and all 4 drives show that they are good.

Can someone shed some light on this please?


Only seeing 3
2 REPLIES
KarloChacon
Honored Contributor

Re: DL 380 G5 Raid 5 Drives Not Displaying Properly

hi

have you checked your windows disk management?

regards
Didn't your momma teach you to say thanks!
Mark E. Hughes
Occasional Visitor

Re: DL 380 G5 Raid 5 Drives Not Displaying Properly

Knew I was have a brain fart. Drive was partitioned with unformatted portion.

Thanks