ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 380 G5 sending snmp after hot plugged a disk

 
k119
Occasional Visitor

DL 380 G5 sending snmp after hot plugged a disk

Hi Guys,

               During a OS upgrade from RHEL 4.2  to RHEL 4.8, I have removed one of the hard disk (servers has only 2 disks with RAID1) and place back after update the OS successfully. But Since then we receive below alarms cont.

----------------------------
07/19/11 09:30:08 serv1 in Jul 19 09:24:24 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us READY FOR RECOVERY to RECOVERING
07/19/11 10:05:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from status RECOVERING to OK
07/19/11 10:30:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from status RECOVERING to OK
............
......
....
..
----------------------------

Issue is even after 2 days we still receive the alarm. This is happening on two servers. So far no issue in the server or OS. Please advice

Thanks

Kasun

3 REPLIES
Johan Guldmyr
Honored Contributor

Re: DL 380 G5 sending snmp after hot plugged a disk

Hello,

it would be good if you could take a look in the ACU - and check the status of the array/logical drive 1 in there.
If possible, an ADU report would also come in handy.
k119
Occasional Visitor

Re: DL 380 G5 sending snmp after hot plugged a disk

Hi Johan,

                 Thank for the help. Issue I am facing here is these messages were create after/during hot  plugging the disk1 to bay1. It seems the cmaeventd continuously sending the same snmp over and over again. Below is the complete messages received to snmp server.

 

------------------------------------------------------------

07/19/11 09:30:08 serv1 in Jul 19 09:24:24 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us READY FOR RECOVERY to RECOVERING
07/19/11 10:05:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 10:30:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 11:05:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 11:30:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 12:05:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 12:30:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 13:05:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 13:30:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 14:05:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 14:30:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 15:05:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 15:30:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 16:05:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 16:30:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 17:05:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK
07/19/11 17:30:02 serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from stat
us RECOVERING to OK

------------------------------------------------------------

 

snmp message  - "serv1 in Jul 19 09:59:41 serv1 Event Log Daemon:[5033]: Logical drive 1 of Embedded Array Controller, has changed from status RECOVERING to OK"

 

Same issue can be seen in another server also. which was also had a hot puged disk after OS upgrade.

 

From disk-1 I wasn't able to find any issue so far.

 

Thanks

 

Kasun

Johan Guldmyr
Honored Contributor

Re: DL 380 G5 sending snmp after hot plugged a disk

Ah ok the daemon keeps on reporting, it's not like the array is going from recovering -> OK -> recovering -> loop.

Tried restarting the daemon? Maybe the OS update did some changes to this daemon? A configuration change?
Are there any HP agents installed? Maybe those needs to be updated too?