DL 380 G5

[Kuechler_1]

Beep Signal: I have a beep with a 6 secound interval. Have somebody an idea, wath it is?
Thanks for an answer!

[Erdogan Temur]

Hi,

Does it have a warning post screen?

[Kuechler_1]

I have no output on the display. When I start the maschine I have only a long beep with 6 secound interval.

[TTr]

Take a look on the service and maintenance guide http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00710359/c00710359.pdf
Starting on page 81 there are a lot of diagnostics using the front panel, also on page 88.

You may want to remove any added parts such as add-on cards, memory, disks and see if the server starts up with bare minimum components.

[TTr]

The beep information is here.

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00300504/c00300504.pdf

One short beep is on page 130, code 212. It says failed processor. Verify it with the diagnostics. If you have two processors in this server, remove them one at a time and see if the server works.