HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 380G6 - Slow boot – initializing P411

 
KaneK
Occasional Advisor

DL 380G6 - Slow boot – initializing P411

We just installed a new P411 SAS card with a BBWC module. The server boots slowly while initialing the P411. Server 2008 R2 (Device Manager) reports that the P411 "cannot start." Any Suggestions?
2 REPLIES
KaneK
Occasional Advisor

Re: DL 380G6 - Slow boot – initializing P411

Just took the BBWC and the RAM module out and the server booted quickly. Going to try and boot with just the RAM module.
KaneK
Occasional Advisor

Re: DL 380G6 - Slow boot – initializing P411

Added the RAM module back in. We were then able to enter the ROM configuration during system boot. Leaving the BBWC module out until it is configured then we will try and add it again.